Rooftop gardens and soft artificial grass for balcony give apartment dwellers delightful garden settings in which to enjoy fresh air and chat with friends. TigerTurf has installed many of these upper level landscape features over the years, safely overcoming some challenging access and technical points.<\/p>\n
Builders, architects<\/a> and landscape designers are responsible for constructing strong, safe, watertight rooftops to support the weight of the base, turf and infill.<\/p>\n \u2022 They must plan to ensure the base is built to carry the weight of the synthetic grass turf.<\/p>\n \u2022 They must also make sure adequate drainage is achieved.<\/p>\n TigerTurf\u2019s Technical Director, Don Crockett, shares some useful tips on the key factors that need to be considered.\u00a0 He also introduces our innovative new base product, TenCate Sine, a lightweight shock absorbing pad that has also been designed to capture water and drain it away from the surface.<\/p>\n Planning<\/strong><\/p>\n 1. The landscape turf<\/a> should be installed over a base with a slope to allow water to run off to a drain or gutter (a minimum of 1 percent is recommended).<\/p>\n 2. TigerTurf landscape lawns can be laid over most bases and waterproofing membranes. Lapped waterproofing systems can show through the finished lawn surface.\u00a0 This can be mitigated using the TenCate SINE pad.<\/p>\n 3. TigerTurf\u2019s landscape turfs weigh around 1.2kg to 2kg per square metre.<\/p>\n 4. If the surface is sand-filled, you need to allow an additional 10 kg per square metre for the landscape surface. This must be factored in when planning and building the decks and roof.<\/p>\n 5. It is important to install an effective drainage system to prevent water from sitting on the turf.\u00a0 Our TenCate SINE pad is an extremely effective drainage product that protects the waterproof membrane by draining surface water vertically and then laterally to drainage systems. TenCate Sine is also a lightweight shock absorber that provides comfort underfoot, while providing efficient multi-directional drainage.<\/p>\n 6. TigerTurf infilled synthetic lawn systems can be laid loose as the additional weight of the sand will stabilise the surface. If the surface is exposed to wind, we recommend the turf be fixed at the edges to prevent the wind from catching and lifting the turf. TigerTurf has adhesives that are free of solvents, and these will adhere to most surfaces. However, a small trial or consultation with the waterproof system supplier is always advisable.<\/p>\n 7. TigerTurf landscape lawns that are not infilled with sand will need to be glued directly onto the base.<\/p>\n Access<\/strong><\/p>\n Access can be a problem, as the TigerTurf landscape lawn comes in 3.66 metre rolls, along with the sand infill if this is required. This is most easily resolved by careful planning. Architects, building project managers and TigerTurf project managers should engage in discussions and coordinate strategies from an early stage in the building process.<\/p>\n We can generally overcome most access concerns.\u00a0\u00a0 For example, using a crane, while it is in place to lift building materials, to lift the Tigerturf installation materials and storing on the site until the building is complete and ready for the TigerTurf lawn.\u00a0 In this scenario, weight distribution and weather protection need to be discussed.<\/p>\n Installation<\/strong><\/p>\n TigerTurf\u2019s installation teams can level out valleys and small rises with porous crushed rock, if required.<\/p>\n If this is required, the architect, builder and designer will need to factor in additional weight of around 15kg to 20kg per square metre.<\/p>\n The surface is then overlaid with the landscape grass and SINE pad (if required).\u00a0\u00a0 They know our products and the correct method of installing them to achieve a successful, durable landscape installation on rooftop sites.<\/p>\n The maintenance of the TigerTurf landscape lawns is easy. Contact TigerTurf for more information or read our landscape maintenance article here.<\/p>\n Summary<\/strong><\/p>\n The main message here is to:<\/p>\n 1. plan to ensure the base is built to carry the weight of the synthetic grass turf and<\/p>\n 2. to make sure adequate drainage is achieved.<\/p>\n Contact TigerTurf Melbourne<\/a> early in the planning stages and we can collaborate with you on the best strategy to achieve successful and beautiful landscape lawns.<\/p>\n